Zoppas PEI6440FBK Manual de usuario descargar pdf (Pagina 7)

Daily use

Warning! Refer to Safety chapters.

Activating and deactivating

Touch for 1 second to activate or deactivate the

hob.

Automatic Switch Off

The function deactivates the hob automatically if:

• all cooking zones are deactivated,

• you do not set the heat setting after you activate the

hob,

• you spill something or put something on the control

panel for more than 10 seconds (a pan, a cloth,

etc.). An acoustic signal sounds and the hob

deactivates. Remove the object or clean the control

panel.

• the hob gets too hot (e.g. when a saucepan boils

dry). Let the cooking zone cool down before you use

the hob again.

• you use incorrect cookware. The symbol

comes

on and the cooking zone deactivates automatically

after 2 minutes.

• you do not deactivate a cooking zone or change the

heat setting. After some time

comes on and the

hob deactivates.

The relation between the heat setting and the time

after which the hob deactivates:

Heat setting The hob deactivates af-

ter

, 1 - 2

6 hours

3 - 4 5 hours

5 4 hours

6 - 9 1.5 hour

The heat setting

Touch to increase the heat setting. Touch to

decrease the heat setting. Touch and at the

same time to deactivate the cooking zone.

Automatic Heat Up

If you activate this function you can get a necessary

heat setting in a shorter time. The function sets the

highest heat setting for some time and then decreases

to the correct heat setting.

To activate the function the cooking zone

must be cold.

To activate the function for a cooking zone: touch

( comes on). Immediately touch ( comes

on). Immediately touch until the correct heat setting

comes on. After 3 seconds

comes on.

To deactivate the function: touch .

Power function

This function makes more power available to the

induction cooking zones. The function can be activated

for the induction cooking zone only for a limited period

of time. After this time the induction cooking zone

automatically sets back to the highest heat setting.

Refer to “Technical information” chapter.

To activate the function for a cooking zone: touch

. comes on.

To deactivate the function: touch

or .

Timer

Count Down Timer

You can use this function to set how long the cooking

zone should operate for a single cooking session.

First set the heat setting for the cooking zone then set

the function.

To set the cooking zone: touch

again and again

until the indicator of a necessary cooking zone comes

on.

To activate the function or change the time: touch

or of the timer to set the time (00 - 99 minutes).

When the indicator of the cooking zone starts to flash

slowly the time counts down.

To see the remaining time: set the cooking zone with

. The indicator of the cooking zone starts to flash

quickly. The display shows the remaining time.

To deactivate the function: set the cooking zone with

and touch . The remaining time counts back to

00. The indicator of the cooking zone goes out.

1 2 3 4 5 6 7 8 9 10 11 12 ... 19 20

Comentarios a estos manuales

Sin comentarios

Zoppas PEI6440FBK Manual de usuario Pagina 7

Comentarios a estos manuales

Relacionado con productos y manuales para Placas Zoppas PEI6440FBK