Zoppas PEI6730XBA Manual de usuario descargar pdf (Pagina 7)

RESIDUAL HEAT INDICATOR

WARNING! There is a risk of

burns from residual heat.

The induction cooking zones make the heat

necessary for cooking process directly in the

bottom of the cookware. The glass ceramic is

heated by the heat of the cookware.

DAILY USE

WARNING! Refer to Safety chapters.

ACTIVATING AND DEACTIVATING

Touch for 1 second to activate or deactivate the

hob.

AUTOMATIC SWITCH OFF

The function deactivates the hob

automatically if:

• all cooking zones are deactivated,

• you do not set the heat setting after you activate

the hob,

• you spill something or put something on the

control panel for more than 10 seconds (a pan,

a cloth, etc.). An acoustic signal sounds and the

hob deactivates. Remove the object or clean the

control panel.

• the hob gets too hot (e.g. when a saucepan

boils dry). Let the cooking zone cool down

before you use the hob again.

• you use incorrect cookware. The symbol

comes on and the cooking zone deactivates

automatically after 2 minutes.

• you do not deactivate a cooking zone or change

the heat setting. After some time comes on

and the hob deactivates.

The relation between the heat setting and the

time after which the hob deactivates:

Heat setting

The hob deactivates

after

, 1 - 2

6 hours

3 - 4 5 hours

5 4 hours

6 - 9 1.5 hour

THE HEAT SETTING

To set or change the heat setting:

Touch the control bar at the correct heat setting or

move your finger along the control bar until you

reach the correct heat setting.

BRIDGE FUNCTION

The function operates when the pot

covers the centres of the two zones.

This function connects two left side cooking zones

and they operate as one.

First set the heat setting for one of the left side

cooking zones.

To activate the function: touch

. To set or

change the heat setting touch one of the control

sensors.

To deactivate the function: touch . The

cooking zones operate independently.

AUTOMATIC HEAT UP

Activate this function to get a desired heat setting

in a shorter time. When it is on, the zone operates

on the highest setting in the beginning and then

continues to cook at the desired heating setting.

To activate the function the cooking

zone must be cold.

To activate the function for a cooking zone:

touch ( comes on). Immediately touch a

desired heat setting. After 3 seconds comes on.

To deactivate the function: change the heat

setting.

1 2 3 4 5 6 7 8 9 10 11 12 ... 19 20

Comentarios a estos manuales

Sin comentarios

Zoppas PEI6730XBA Manual de usuario Pagina 7

Comentarios a estos manuales

Relacionado con productos y manuales para Placas Zoppas PEI6730XBA