Zoppas PEV8448FBK Manual de usuario Pagina 21

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 52
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 20
Scratches or dark stains on the surface have no
effect on how the hob operates.
Use a special cleaner applicable for the surface of
the hob.
Use a special scraper for the glass.
Cleaning the hob
Remove immediately: melted plastic, plastic foil,
and food with sugar. If not, the dirt can cause
damage to the hob. Put the special scraper on the
glass surface at an acute angle and move the blade
on the surface.
Remove when the hob is sufficiently cool:
limescale rings, water rings, fat stains, shiny metallic
discoloration. Clean the hob with a moist cloth and
some detergent. After cleaning, rub the hob dry with
a soft cloth.
Troubleshooting
Warning! Refer to Safety chapters.
What to do if...
Problem Possible cause Remedy
You cannot activate or operate the
hob.
The hob is not connected to an
electrical supply or it is connected
incorrectly.
Check if the hob is correctly connec-
ted to the electrical supply. Refer to
the connection diagram.
The fuse is released. Make sure that the fuse is the cause
of the malfunction. If the fuse relea-
ses again and again, contact a
qualified electrician.
Activate the hob again and set the
heat setting in less than 10 sec-
onds.
You touched 2 or more sensor fields
at the same time.
Touch only one sensor field.
There is water or fat stains on the
control panel.
Clean the control panel.
An acoustic signal sounds and the
hob deactivates.
An acoustic signal sounds when the
hob is deactivated.
You put something on one or more
sensor fields.
Remove the object from the sensor
fields.
The hob deactivates. You put something on the sensor
field .
Remove the object from the sensor
field.
Residual heat indicator does not
come on.
The zone is not hot because it op-
erated only for a short time.
If the zone operated sufficiently long
to be hot, speak to an Authorised
Service Centre.
Automatic Heat Up function does
not operate.
The zone is hot. Let the zone become sufficiently
cool.
21
Vista de pagina 20
1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 51 52

Comentarios a estos manuales

Sin comentarios